Disclosure: Just to be open and honest the buttons and links you click on in the website will in most cases take you to another website where you can purchase the products I am reviewing. As an Amazon Associate I earn from qualifying purchases.

Where Trout Hide: Streamer Water Spots Beginners Often Overlook

Where do trout hide in a river? Mostly in spots that give them cover and slow water next to fast current: undercut banks, seam edges, tailouts, deep outside bends, and woody structure or boulders. Cast your streamer tight to those places, not into open, even-depth water, and you will see more follows and strikes.


Why do trout hold where they do when you fish streamers?

Trout hold where they can rest in slow water, stay out of sight, and reach food that current delivers without much effort. A streamer imitates a baitfish, sculpin or leech, so the fish that eat it are usually waiting beside cover, ready to dart out and grab something.

That explains the follows beginners miss. A wide, flat stretch of even-depth water gives a trout no reason to sit there. The fish are a few feet away, tucked against a bank, a log or a current edge, and the fly never passes them.

Streamers also reach water that nymphs and dries handle badly. They can be cast tight to a bank, stripped across a seam, or pulled past a logjam, and the trout living there will often come out for them. If you want the general stream-reading basics first, how to read water for nymph fishing covers them. This article only covers the spots that reward a streamer.

Five places are worth your first casts:

  • Undercut banks and overhanging cover
  • Seams beside fast current
  • Deep outside bends
  • Tailouts at the end of a pool
  • Boulders, logjams and other structure

Are undercut banks and overhanging cover worth your first casts?

Yes, because an undercut bank gives a trout shade, a roof and a deep spot to bolt into, all within a body length. Look for banks where the current has carved out the edge, where grass or brush hangs over the water, and where the water along the bank looks darker than the water out in the channel.

The mistake is wading in to stand beside the bank you want to fish. Trout in this spot can see and feel you from a short distance, and walking along the edge pushes them deeper under the bank. Stay out in the stream, a rod length or more from the cover, and fish the bank from there.

Put the fly within a foot or two of the bank, closer if you can do it without snagging. A streamer that lands in the middle of the river and is stripped toward the bank only crosses the productive zone for the last few feet. Land it at the bank and strip it parallel to the edge, so it stays in that zone for the whole retrieve.

Expect to snag the bank now and then. A few lost flies are the price of fishing where fish actually live, and it is a better trade than a clean retrieve through empty water.


Why do trout sit on the seams beside fast current?

A seam is the line where fast water meets slow water, and trout sit on the slow side because it costs them almost no energy and puts food a few inches away. Seams form beside boulders, along the edges of channels, below islands, and where two currents join.

You can usually spot one as a change in surface texture: choppy or streaky water on one side, smoother water on the other, sometimes with a thin line of foam or bubbles running along the join. Fish tend to hold in the calmer side, within a foot or so of the line.

A streamer fished across a seam gives the fish a clear target. When the fly crosses from fast to slow water, the change in speed makes it look like a wounded baitfish struggling, and trout often react to that.

Cast so the fly lands on the fast side, then let it swing or strip it into the slow side. You can also cast along the seam and keep the fly on the slow edge for as long as possible. Fishing the seam from the slower water is often easier, because you are not trying to manage line across several different current speeds.


What do deep outside bends and tailouts offer that beginners wade right through?

Deep outside bends and tailouts both concentrate fish, and both are easy to walk across without noticing. They look different, so it helps to know what each one is.

Outside bends

On a bend, the current pushes toward the outer bank and digs it deeper. That produces a deep channel along the outside edge, often with an undercut bank, fallen trees and slower water near the bottom. Beginners often wade the inside of the bend, which is shallow and easy, and cast toward the middle. The fish sit on the far side along the deep edge.

Stand on the inside of the bend, where wading is easier and you are less visible, and aim your casts at the outer bank. Let the streamer sink and strip it along the edge, so it follows the drop-off.

Tailouts

A tailout is the shallow, smooth, fast-gliding water at the downstream end of a pool, just before it breaks into a riffle. Trout often move up into tailouts to feed, especially in low light, because the water is shallow enough for them to spot food but still moves enough to bring it to them.

Wading straight through a tailout is a common way to scatter the fish that were holding there. Fish it from below or from the side before you step in. Cast across or slightly downstream, let the fly swing through the glassy water, and use slow, short strips near the end of the swing.


Do boulders, logjams and shallow structure really hold fish?

They do, because any object that breaks the current creates a small area of slack water, and it gives trout something to hide behind. The fish may sit in front of a rock, beside it, behind it, or underneath the cover next to it.

Boulders: Look for pockets of slower water in front of, beside and behind the rock. Cast to the downstream side or to the seam beside it, and strip the fly through the pocket. Several boulders in a row often form a series of pockets, and each one deserves a cast or two.

Logjams and fallen trees: Wood gives trout overhead cover, shade and a place to retreat. It also snags flies, so approach it with a plan. Cast beside the wood, not into it, and strip the fly away from the structure so a following fish has room to eat it before the fly reaches the branches. Use tippet strong enough to turn a fish away from the wood once it takes.

Shallow structure: Even small features count. A single submerged branch, a patch of weeds, a slight dip in the streambed or a rock the size of a basketball can hold a fish. Small structure in otherwise featureless water is often where the fish are, so a cast to it is worth more than a cast at nothing.


How should you cast and retrieve a streamer in each spot?

Match the cast angle and retrieve speed to the spot, and aim to keep the fly near the cover for as long as you can. The table below gives a starting point for each one.

Spot

Where to stand

Where to cast

Retrieve

Undercut bank

Out in the stream, a rod length or more from the bank

Within a foot or two of the bank, then strip parallel to it

Short, steady strips; pause now and then

Seam edge

On the slow side, or downstream of it

Across the seam, or along its slow edge

Swing across the line, then short strips

Outside bend

On the inside of the bend

At the outer bank, upstream of the deepest part

Let the fly sink, then strip along the drop-off

Tailout

Below it or to one side, before you wade in

Across or slightly downstream

Slow swing, then short, slow strips

Boulder pocket

Downstream or beside the rock

Beside the rock or into the slack water behind it

Short strips, then a pause in the pocket

Logjam or wood

Out from the wood, with a clear line to the fly

Parallel to the wood, close enough to pass it

Strip away from the wood, so the fish has room to eat

A few habits apply to all of these:

  1. Make your first cast to the closest water, then work outward, so you do not spook fish near your feet.
  2. Take two or three casts at a good spot, then move on. If a fish is there and interested, it usually shows itself quickly.
  3. Vary the retrieve. If strips get no follows, try a slower pace, a longer pause or a faster pull.
  4. Watch the fly on every retrieve. Fish often follow it right up to your feet, and a pause or a change of pace at the end can turn a follow into a take.

FAQs: five quick answers on finding trout with streamers

How close should a streamer land to the bank or structure? Within a foot or two is a good target. Closer is better where you can do it without snagging every cast, because the fly then stays near the cover for most of the retrieve.

How many casts should I make at one spot? Two or three well-placed casts are enough for most spots. If nothing follows, change the angle or retrieve once, then move to the next piece of cover.

Should I cast upstream or downstream with a streamer? Either works, and the spot decides. Casting across and letting the fly swing suits seams and tailouts, while casting along a bank and stripping parallel to it suits undercut banks and outside bends.

Why do trout follow my streamer but not eat it? The fly may be moving at a pace that looks wrong, or the fish may have seen you. Slow down, speed up or add pauses, stay lower and farther back, and keep the fly moving until it reaches your feet.

Do streamers work in low, clear water? They can, but the trout are easier to spook. Fish the deeper cover, such as undercut banks and the heads of pools, keep your distance, and use low light early or late in the day when you can.


What to do on your next stretch of water

Pick one spot from the table and fish it properly before moving on. Position yourself first, place the fly close to the cover, and use the retrieve that matches the spot. Doing that on one undercut bank or one seam teaches more than a hundred casts into open water.

On your next trip, walk the bank before you wade in, and mark the places where the water changes: a darker edge, a seam line, a bend, a tailout, a log. Fish those in order, closest first.

To pair this with the basics, read Nymphs, Dries, and Streamers: The Beginner’s Guide to Choosing a Fly before your next trip, then pick one spot from the table and fish it properly.

Add a Comment

Your email address will not be published. Required fields are marked *

Pin It on Pinterest

Share This